I have restarted the computer several times. I just have to attempt to uninstall any device listed in Device Manager and it happens. This is an easily reproducible problem for me. I left it overnight the first time, and came back to it just the same in the morning. The window comes up with the Uninstalling Device window with a sweeping green bar and. (USB 3.0 controller, External Keyboard, and internal SD Card reader). The above troubleshooting steps should help you to conclude the main cause of endless PC restart, but if all these fail to fix or isolate hardware causing the reboot issue, it would be best to call in a PC expert who can troubleshoot and fix PC reboot issue.I have so far attempted to uninstall three separate devices by using the Device Manager and selecting to uninstall the device. If you notice any change in reboot loop then most likely the metal case/cabinet is shorting the motherboard. Take out your motherboard from the case and put it on the cardboard or non-conducting surface and try to boot your PC with just CPU installed. Try removing all the drivers and other components that are not required for PC booting and troubleshooting it. Realign the bent socket pin and connect your processor carefully and reboot your system to see if it fixes the issue.Īlso, do keep in mind bent or broken pins would void your warranty and you won’t be able to RMA motherboard. The bent or misaligned CPU socket pin in most cases works by slightly readjusting it (do not apply force or pressure that it can end up being broken) but broken once won’t work, and you are out of your options. Motherboard CPU Socketĭo a careful observation of CPU socket of your motherboard, see if any of the pins of CPU socket is bent or broken. You must make to purchase new branded SMPS (PSU) and according to your computer requirement. If your system boots properly then your SMPS is the reason. Testing with new SMPS or working SMPS would be the best way to figure out the issue. SMPS aka power supply unit can also be a reason for PC restarts issue. Then apply new thermal grease on the processor and connect the CPU cooler and reboot your system to see if it solves your reboot problem. Then using dry cotton cloth remove the existing thermal paste residues from the processor as well as from the CPU cooler surface of contact. Make sure to carefully take out the CPU cooler and remove the processor from the motherboard. Over the time the thermal paste applied on the processor can become dry making it hard to regulate the temperature of the processor even with best CPU cooler available in the market. Removing Processor, Reapplying new Thermal grease/paste At any cost don’t attempt to blow air using your mouth, as an even tiny drop of mouth saliva would short and damage motherboard permanently. Use air blower or vacuum cleaner or compressed air cane to blow the air directly on the motherboard to remove the dust. In some cases, this dust can also act as a conductor leading to shorting of motherboard components and the reboot loop. People living in places with heavy air pollution often face this issue, where the open or closed cabinet/case has the dust accumulated around fans, heatsink as well as on motherboard. In our case, it turned out dust settled on motherboard being the reason for infinite reboot loop. But it would be best to confirm it by the running system with bare minimum hardware components. Often GPU aren’t the reason of reboot loop. If you have empty PSI Express slot then try putting GPU card into that slot and test booting your system. You must remove graphics card along with RAM stick and try to boot your system. Epic Games Launcher Currently Running Error The clear CMOS button is not available on your motherboard then read the steps about removing BIOS battery in the next section. If your computer boots proper, you may need to reconfigure your BIOS according to your need. Doing this would also result in loss of any BIOS changes/modifications you had done. The CMOS clear button is meant to erase your BIOS setting and reset it to factory defaults, that your motherboard comes out of the box. Pressing this small button can fix your Computer reboot loop or any other hardware compatibility related issues. Clear CMOS buttonĪt the back of your motherboard, you can find a small blue button which is to clear the BIOS data. Testing Motherboard Outside the Case Troubleshooting / Fixing Computer Reboot Loop 1. Removing RAM/Changing RAM slot/Using Different RAM Sticks Troubleshooting / Fixing Computer Reboot Loop.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |